ZHENGOU GroupZHENG'OU

Aplicação

Indústria química & pesada

Ataque de ácidos, álcalis e solventes combinado a choque térmico. Vinil éster e poliuretano onde o epóxi comum formaria bolhas.

O que este piso precisa suportar

Entenda o modo de falha antes de escolher um sistema.

  1. 01

    Acids, alkalis and solvents attack the floor daily — standard epoxy dissolves here.

  2. 02

    Thermal shock from hot processes and cold washdown works coatings loose from the slab.

  3. 03

    Spillage must not reach the concrete — or the ground beneath it.

  4. 04

    Mechanical damage — impacts, pallet edges, trolleys — opens paths for chemicals to attack.

Indústria química & pesada

Sistemas de revestimento recomendados

Selecionados por carga de trabalho — não existe sistema universal, existe o que se adapta.

01

Vinyl ester heavy-duty anti-corrosion system (fiberglass-reinforced)

Esquema de camadas
Vinyl ester primer → fiberglass mat lamination (layers as required) → vinyl ester mortar → vinyl ester topcoat

The fiberglass lamination bridges cracks and carries the chemical load — the standard answer for acid, alkali and solvent duty.

Sequência padrão de aplicação

O mesmo piso com os mesmos materiais pode durar anos mais quando o serviço é executado com cuidado. Os seis passos abaixo são a nossa sequência padrão para pisos epóxi: o que cada etapa faz, segundo qual norma e o que verificamos na entrega. Para o seu galpão, ajustamos o número de camadas e a espessura às cargas reais, aos produtos químicos e à janela de parada.

  1. 01

    Substrate preparation

    Grinding, repair and drying; the slab must be sound before any corrosion barrier goes on. Defects such as cracks and voids are located and marked one by one, and repaired before any corrosion work starts.

  2. 02

    Vinyl ester primer

    Primer bonds the system to the slab and is the first chemical barrier. Penetration is confirmed zone by zone; under-fed areas get an extra coat.

  3. 03

    Fiberglass lamination

    Fiberglass mat is wetted out layer by layer in vinyl ester — the reinforcement that bridges cracks. Mat overlaps are staggered as the system requires, with air worked out layer by layer.

  4. 04

    Mortar coat

    Vinyl ester mortar builds thickness and levels the reinforced surface. The mortar doubles as the second barrier; corners and pipe penetrations are thickened with a coved transition.

  5. 05

    Topcoat

    Vinyl ester topcoat seals the system into one continuous chemical barrier. After the topcoat, appearance and build are re-checked against the design before handover.

Fotos de obra

Pisos prontos fotografados na obra — clique para ampliar e inspecionar os detalhes.

Fiberglass build-up

Multi-layer fiberglass lamination mid-installation.

Topcoat application

Vinyl ester topcoat applied over large areas — the final chemical barrier taking shape.

Completed resin surface

The continuous resin surface before final inspection.

Projetos representativos

Uma seleção de projetos entregues pelo grupo.

  • Jiaxing Geno Electric anti-corrosion project

    Anti-corrosion coating for cable junction boxes and cable trays. Electrical equipment lives in damp, corrosive environments; vinyl-ester systems are applied layer by layer to steel components and junction boxes to lengthen maintenance intervals.

  • Kaide New Energy industrial base (Guangzhou)

    Abrasion-resistant flooring and anti-corrosion works, Lot 1. With a short build programme and overlapping trades at the new-energy base, works were organised as a flowing sequence so flooring and anti-corrosion were handed over together.

  • Wanhua Chemical

    A group framework cooperation newly awarded in 2025. Chemical plants concentrate flooring and anti-corrosion needs in workshops, tank farms and pipe racks; we recommend vinyl-ester or polyurethane systems zone by zone according to the chemicals present.

  • Shougang Group heavy-industrial sites

    Steel and heavy-industry buildings combine abrasion, heat and chemical exposure under one roof. We supply flooring materials to Shougang Group sites, selecting systems zone by zone according to the medium and load each area actually sees.

  • Minth Automotive Europe plant, Serbia

    A 2020 overseas supply project: we exported a complete vinyl ester package — resin, surface coating, fiberglass mats and cloth, corundum sand and application tools — from Shanghai to the buyer's plant in Loznica, Serbia. The floor was built as a fiberglass-reinforced vinyl ester system ("five cloth, seven coat") covering roughly 100,000 m².

Perguntas frequentes

O que os compradores mais perguntam ao especificar um revestimento de piso.

Which chemicals can the system withstand?

The vinyl ester range is tested against acids, alkalis and solvents at defined concentrations — the results are published per product on the site. Send us your chemical list and we confirm the fit.

Saiba mais
Why lay fiberglass cloth?

Concrete moves and cracks; the fiberglass lamination carries those movements and keeps the chemical barrier continuous above them.

Saiba mais
Our plant has both acid and alkali zones — one system?

In many cases yes; where duty differs sharply, we vary the topcoat between zones while keeping one overall programme.

Saiba mais
Can you renovate a failed anti-corrosion floor?

Yes — the assessment decides whether the sound layers stay and only the top is rebuilt, or the system is redone from the slab. Both keep the plant running zone by zone.

Saiba mais

Conte-nos sobre o seu piso

Envie o substrato, a área e o que o piso precisa suportar. Você receberá um sistema recomendado, um desenho do esquema de camadas e um orçamento — normalmente em um dia útil.

Solicitar orçamento